View MC13159_127921.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Order this document by MC13159/D
MC13159
Advance Information Wideband FM IF Subsystem
The MC13159 is a wideband FM IF subsystem that is designed for high performance data and digital applications. Excellent high frequency performance is achieved, with low cost, through the use of Motorola's RF bipolar process. The MC13159 includes a mixer, local oscillator buffer amplifier, IF amplifier, limiter amplifier and RSSI functions. The mixer is useful for a 240 MHz input used in a single-ended/balanced differential configuration. The IF and limiter amplifier are separated so that an external filter can be used in series, or connected directly with an external capacitor. The RSSI output is derived by summing the output of both the IF and Limiter sections. An enable control is provided to power down the IC for power management in battery powered applications. Suitable applications include PHS, DECT, PDC, and PCS telephones, wideband wireless data links, and other battery powered radio systems. * Designed for PHS Applications
WIDEBAND FM IF SUBSYSTEM FOR PHS AND DIGITAL APPLICATIONS
SEMICONDUCTOR TECHNICAL DATA
16 1
* * * * * *
2.7 to 5.5 V Operating Voltage Low Drain Current: 5.5 mA (Typ) Wide Input Dynamic Range of Mixer (Maximum -16 dBm Input) Enable Function for Power Down Mode Over 80 dB of RSSI Dynamic Range (AC Coupling between IF Amplifier and Limiter Amplifier) Few External Components Required
DTB SUFFIX PLASTIC PACKAGE CASE 948F (TSSOP-16)
ORDERING INFORMATION
Device MC13159DTB Operating Temperature Range TA = -30 to +85C Package TSSOP-16
Simplified Block Diagram
Mixin 16 VEE 15 Mixout 14 Enable 13 IFin 12 IFDec1 11 IFDec2 10 IFout 9
Mixer RSSI Local Oscillator Buffer
IF Amp
LIM Amp
1 Mix Decoup
2 VCC
3 LOin
4 RSSI
5 LIMDec2
6 LIMout
7 LIMDec1
8 LIMin
This device contains 164 active transistors.
This document contains information on a new product. Specifications and information herein are subject to change without notice.
(c) Motorola, Inc. 1997
Rev 1
MOTOROLA ANALOG IC DEVICE DATA
1
MC13159
MAXIMUM RATINGS
Rating Power Supply Voltage Junction Temperature Storage Temperature Range
NOTE: ESD data available upon request.
Symbol VS(max) TJmax Tstg
Value 6.0 150 -65 to +150
Unit Vdc C C
RECOMMENDED OPERATING CONDITIONS
Rating Power Supply Voltage Input Frequency Ambient Temperature Range Input Signal Level at Local Input Symbol VS fin TA Vin Value 2.7 to 5.5 10 to 600 -30 to +85 -10 Unit Vdc MHz C dBm
DC ELECTRICAL CHARACTERISTICS (TA = 25C, VS = 3.0 V; No Input Signal)
Characteristics Total Drain Current 1 Total Drain Current 2 Conditions Active Mode Disable Mode Symbol ICC1 ICC2 Min 4.5 - Typ 5.5 0.1 Max 7.5 10 Unit mA A
AC ELECTRICAL CHARACTERISTICS
Characteristics Conditions Symbol Min Typ Max Unit
MIXER (TA = 25C; VS = 3.0; fRF = 240 MHz, fLO = 229.3 MHz)
Mixer Conversion Gain Noise Figure Mixer Input Impedance Mixer Output Impendance 1.0 dB Gain Compression 3rd Order Input Intercept 50 Termination Input Matched Input Matched Single-Ended - @Mixin 50 Termination - NF Rp Cp - Vicp IIP3 11 - - - - - - - 14 21 14 400 4.0 330 -16 -8.0 17 - - - - - - - dB dB pF dBm dBm
IF AMPLIFIER SECTION (TA = 25C; VS = 3.0 V; fIF = 10.7 MHz)
IF Gain Input Impedance Output Impedance f = 10.7 MHz - - - - - 32 - - 36 330 330 45 - - dB
LIMITING AMPLIFIER SECTION (TA = 25C; VS = 3.0 V; fIF = 10.7 MHz)
Limiter Gain Input Impedance Output Swing Output Rise Time Output Fall Time f = 10.7 MHz - - - - - - - - - - - 400 - - 70 330 500 10 20 - - 600 - - dB
mVpp ns ns
mV/dB
RSSI SECTION (TA= 25C; VS = 3.0 V; fIF = 10.7 MHz)
RSSI Slope RSSI Output DC Voltage 1 RSSI Output DC Voltage 2 RSSI Output DC Voltage 3 RSSI Output DC Voltage 4 RSSI Output DC Voltage 5 - No Input Signal VIF = -85 dBm VIF = -80 dBm VIF = -40 dBm Vin = 0 dBm - - - - - - 10 0.8 0.82 0.85 1.4 1.95 14 0.9 0.95 1.0 1.5 2.1 18 1.0 1.02 1.15 1.6 2.25
V V V V V
2
MOTOROLA ANALOG IC DEVICE DATA
MC13159
Figure 1. Test Circuit
IFin 10.7 MHz Mixout 10.7 MHz 10 n RFin 240 MHz 330 50 10 n 16 Mixin 15 14 13 Enable DCI 1.0 n 10 n 39 p 12 IFin 11 IFDec1 10 IFDec2 9 IFout 1.0 n a S1 50 b V 10 n IFout 10.7 MHz
V
VEE Mixout
Mixer RSSI Local Oscillator Buffer Mix Decoup 1 220 p 1.0 n 100 n DCI 47 p 10 n V 10 n 10 k VCC 50 Local Osc Input 229.3 MHz -10 dBm 1.0 n
IF 39 p
LIM
VCC 2
LOin 3
RSSI 4 5
LIMDec2 6
LIMout 7
LIMDec1 8
LIMin
10 n
10 p (From Probe Impedance) V
MOTOROLA ANALOG IC DEVICE DATA
3
MC13159
Figure 2. Test Circuit for Evaluation
Vmixo Mixout 10.8 MHz 330 RFin 248.5 MHz Vmix 10 n 10 n 50 VIF IFin 10.8 MHz
CF1
100 p VEE 51 16 Mixin 15 14 13 Enable 0 12 IFin 11 IFDec1 100 p 1.0 n
10 IFDec2
9 IFout
VEE Mixout
Mixer RSSI Local Oscillator Buffer Mix Decoup 1 220 p 1.0 n 100 n VCC 10 n Vosc 51 Local Osc Input 237.7 MHz 47 p RSSI 100 p 1.0 n T.P 10 k
IF 39 p CF2
LIM
39 p
VCC 2
LOin 3
RSSI 4 5
LIMDec2 6
LIMout 1.0 n 7
LIMDec1 8
LIMin
100 p LIMout 10.8 MHz 0.5 Vpp 10 p
RF Input Matching Circuit (To Pin 16)
NOTES: 1. CF1: Murata CFEC10.8MK1 (single filter application) or Murata CFEC10.8MG1 (dual filters application) 2. CF2: Murata CFEC10.8ME1 (dual filters application) : BNC (unless otherwise specified)
22 p
: Banana Jack NOTE:
47 nH
4.0 p
All resistors and capacitors are the chip components except coupling at CF2. Text boards are for the TSSOP package and socket.
4
MOTOROLA ANALOG IC DEVICE DATA
MC13159
PIN FUNCTION DESCRIPTION
Pin 1 Symbol Mix Decoup VCC 1.0 k 16 Mixin 16 1.0 k 1 Mixer Input Input impedance is about 400 at 240 MHz. Single-ended matching section at 240 MHz is referenced at application circuit. Supply Voltage Supply voltage range range is from 2.7 Vdc to 5.5 Vdc. 1.0 nF of decoupling capacitor is placed directly at this pin to reduce the floor noise. VCC 1.0 k 3 VCC Local Oscillator Input Connected to external local oscillator. Input impedance is about 900 at 230 MHz. VCC Internal Equivalent Circuit Description Mixer Decoupling Mixer decoupling pin. 220 pF is decoupled to the RF ground. This pin also can be used for differential input with Mixin.
2
VCC
3
LOin
4
RSSI
VCC VCC
RSSI The RSSI current creates a voltage drop across an internal 15 k resistor. 4
15 k
5 7
LIMDec2 LIMDec1
VCC VCC VCC VCC
Limiter Decoupling Limiter decoupling pins. Decoupling capacitors are connected to the RF ground, and one is placed between Dec1 and Dec2 Dec2. 5
8 8 LIMin 330 7
Limiter Input The input impedance is 330 ; it matches the 330 input resistance of a 10.7/10.8 MHz ceramic filter.
6
LIMout
VCC VCC 10 6 800 A
Limiter Output The output level is about 0.5 Vpp.
MOTOROLA ANALOG IC DEVICE DATA
5
MC13159
PIN FUNCTION DESCRIPTION (continued)
Pin 9 Symbol IFout Internal Equivalent Circuit VCC VCC 220 9 300 A Description IF Output The output impedance is 330 ; it matches the 330 input resistance of a 10.7/10.8 MHz ceramic filter.
10 11
IFDec2 IFDec1
VCC VCC VCC VCC
IF Decoupling IF decoupling pins. Decoupling capacitor is connected from Dec1 to the RF ground, and one is placed Dec2. between Dec1 and Dec2 11
12 12 IFin 330 10
IF Input The input impedance is 330 ; it matches the 330 input resistance of a 10.7/10.8 MHz ceramic filter.
13
Enable
VCC
VCC
Enable The IC regulators are enabled by placing this pin at VEE.
13
40 k
14
Mixout 6.0 k
VCC VCC 220 700 A
Mixer Output The mixer output impedance is 330 ; it matches the 330 input resistance of a 10.7/10.8 MHz ceramic filter.
14
15
VEE
Supply Ground
6
MOTOROLA ANALOG IC DEVICE DATA
MC13159
OUTLINE DIMENSIONS
DTB SUFFIX PLASTIC PACKAGE CASE 948F-01 (TSSOP-16) ISSUE O
16X K REF
0.10 (0.004) 0.15 (0.006) T U
S
M
TU
S
V
S
K K1
16 NOTES: 1 DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2 CONTROLLING DIMENSION: MILLIMETER. 3 DIMENSION A DOES NOT INCLUDE MOLD FLASH. PROTRUSIONS OR GATE BURRS. MOLD FLASH OR GATE BURRS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4 DIMENSION B DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION. INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 (0.010) PER SIDE. 5 DIMENSION K DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE K DIMENSION AT MAXIMUM MATERIAL CONDITION. 6 TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 7 DIMENSION A AND B ARE TO BE DETERMINED AT DATUM PLANE -W-. DIM A B C D F G H J J1 K K1 L M MILLIMETERS MIN MAX 4.90 5.10 4.30 4.50 --- 1.20 0.05 0.15 0.50 0.75 0.65 BSC 0.18 0.28 0.09 0.20 0.09 0.16 0.19 0.30 0.19 0.25 6.40 BSC 0_ 8_ INCHES MIN MAX 0.193 0.200 0.169 0.177 --- 0.047 0.002 0.006 0.020 0.030 0.026 BSC 0.007 0.011 0.004 0.008 0.004 0.006 0.007 0.012 0.007 0.010 0.252 BSC 0_ 8_
2X
L/2
9
J1 B -U-
L
PIN 1 IDENT. 1 8
J
N 0.25 (0.010) 0.15 (0.006) T U
S
A -V- N F DETAIL E
C 0.10 (0.004) -T- SEATING
PLANE
H D G
DETAIL E
MOTOROLA ANALOG IC DEVICE DATA
EEE CCC EEE CCC
M
SECTION N-N
-W-
7
MC13159
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 303-675-2140 or 1-800-441-2447 JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 81-3-3521-8315
MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, - US & Canada ONLY 1-800-774-1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 INTERNET: http://www.mot.com/SPS/
8
MC13159/D MOTOROLA ANALOG IC DEVICE DATA

▲Up To Search▲

Price & Availability of MC13159

	To Download MC13159 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .